Anvil Block
The Anvil Block is a solid single semi casting weighing approximately 20 times the nominal....
 
   
  Standards & Slides
The steel casted standards have been designed width a large & heavy base to ....
 
   
  Lifting Mechanisim
On the top of standard is mounted a headgear fabricated form rolled sections. The drive is ....
 
   
  The steel casted standards have been designed width a large and heavy base to ensure maximum stability. These are positioned by a large spigote on the underside of each foot which fits into a machined recess in the anvil block. A tapered wedge locks the standard. This ensures that the standard will not twist and thus the tup is accurately guided. The sliding distance between the standard inwards, and width a drawback bolt outward. Between the standard and the tup is set with the help of a tapered wedge which drawback bolt outward between the standards to anvil block faces, and standard to head gear faces are placed synthetic rubber mats which dampen the induced shock vibrations in the standard and head assembly there by increasing the life of the tup and the slides and the alignment of the machine.

Standards Slides