Anvil Block
The Anvil Block is a solid single semi casting weighing approximately 20 times the nominal....
 
   
  Standards & Slides
The steel casted standards have been designed width a large & heavy base to ....
 
   
  Lifting Mechanisim
On the top of standard is mounted a headgear fabricated form rolled sections. The drive is ....
 
   
  On the top of standard is mounted a headgear fabricated from rolled section. The drive is through vee belts from a high torque AC. Electric motor via flywheel and reduction gear to the lifter shaft. A friction lifting arrangement is fitted on the lifter shaft which runs on double ball bearing and central phosphor bronze bushes which also acts as a support. The friction lifter consists of a constantly rotating drum around which is arranged a steel band with friction lining. This band is anchored at one end to a drum stud in the lifter drum and the other end is carried by a camshaft running through the lifter drum and actuated by a lever. to this leaver is attached the pulling cord. when the cord is pulled it tightens onto the rotating capstan bush and through the camshaft causes the frictio band to grim drum. There upon the lifter drum is rotated thus lifting the tup by meas of a ifting belt. A buffer provides a stop for the lifter drum in its extrme position. A spring ensures free fall by immediately disengaging the friction band from the drum immediately the pulling cord is released.


Positive Water Cooling


Positve water cooling arrangement is provided to avoid excessive heating of the fiction drum. Continuous water flow of approximately 2-3 liter per minute through the per minute through the shaft is required for necessary cooling action.

Positive Water Cooling